Evaluation and possible improvement of drag force models for stalky particles utilisable for CFD-DEM simulations, Lukas Stegemann, Technische Universität Berlin
ENHANCING PHARMACEUTICAL FORMULATIONS AND DRUG DELIVERY BY ATOMIC LAYER DEPOSITION, Hardlife Rambwawasvika, Delft University of Technology
Experimental Investigation of Thermal Mixing of Monodisperse Particles in a Rotary Drum, Wenjing Ma, Otto-von-Guericke-Universität Magdeburg
Fluid flow velocity and temperature quantification in packed beds using phase contrast Magnetic Resonance Imaging, Maitreyi Sangal, Otto-von-Guericke Universität Magdeburg
Construction and validation of a Reactive High Temperature - Shear Testing apparatus, Salvatore La Manna, University of Salerno
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Systems and Tools to Establish a Digital Shadow for Particle Generation Processes, Norbert Riefler, Leibniz Institute for Materials Engineering - IWT
Accelerating Innovative Pathways for Materials Synthesis: Towards Autonomous High-Throughput Nanoparticle Spray-Flame Synthesis, Shabbir Tahir, University of Duisburg-Essen
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Loading component...
Incipient agglomeration vs. breakage at the border to the coating, Ali Kaabi Fallahiyehasl, OVGU Magdeburg
Developing a process workflow to predict particle size changes in agitated filter drying, Ali Rabbani, Newcastle University
Mechanochemical Leaching of Valuable Ions from Engineered Artificial Minerals Using Stirred Media Milling, Lukas Büttner, Technische Hochschule Nürnberg Georg Simon Ohm
Dry particle coating of cathode active material with conductive additive using mechano-fusion process, Siddhi Kulkarni, TU Bergakademie Freiberg
Streamlining Continuous Manufacturing: Wet Granulation of High-Dose Drug Formulations Without Subsequent Drying, Lukas Ries, BASF SE
Development and Testing of Bilayer Mini-Tablets, Rawan Al Zouabi, Heinrich Heine Universität
How the size distribution of grinding media determines the efficiency and wear of stirred media mills, Michael Krist, TU Braunschweig, Institut für Partikeltechnik
Influence of Particle morphology on Paint Properties- A particle Technology Perspective, Amit Sharma, Golcha Associated
Investigations on the breakage behavior of legumes, Jochen Schmidt, Friedrich-Alexander-Universität Erlangen-Nürnberg
Variable volume flows in a hydrocyclone by changing the inlet geometry during the process, Benedikt Schwarz, TH Rosenheim - Campus Burghausen
DEM Simulation of Impact Charge on Particles by Particle Impacts Across Different Chute Lengths, Mehran Javadi, Clausthal University of Technology
Influence of froth properties and particle size on the flotation separation of Li-aluminate from pyrometallurgical slags, Franziska Strube, Helmholtz-Zentrum Dresden-Rossendorf e.V.
Understanding the influence of physical and chemical parameters in aqueous carrier magnetic separation of fine powder systems, Peter Boelens, Helmholtz Institute Freiberg for Resource Technology
Numerical study of the dispersion behavior of CNT agglomerates in epoxy, Oleksandr Hondliakh, University of Kaiserslautern-Landau (RPTU)
Analyzing crown bottom break-off by means of event-based imaging, Anne Katharina Geppert, Leibniz Institute for Materials Engineering - IWT
Comparison of pre-alloying, blending and in-situ mixing for laser metal powder deposition processing, Olaf Stelling, University of Bremen
Defect Formation at SS316L-Cu Powder Interfaces in PBF-LB/M Additive Manufacturing, Nils Ellendt, University of Bremem
Stress-Based Scaling Strategy for Cathode Paste Dispersion Processes in Small-Scale Approaches, Tim Grenda, Institute of Particle Technology
Innovative Solutions for the Sustainable Sealing of Solids, Hendrik Gieraths, Stasskol GmbH
Tuning the surface chemistry of noble metal nanoparticles, Patricia Schmul, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Surface chemistry assessment of functionalized silica materials, Christoph Huber, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Investigating the Impact of Expansion and Bubble Explosion on Particle Size Variation in Single Droplet Drying and Spray Drying Processes, Xuqian Li, The University of Sheffield
Wettability characterisation of ultrafine particles in heterocoagulation separation – a special focus of the influence of particle shape, Johanna Sygusch, Helmholtz-Zentrum Dresden-Rossendorf, Helmholtz Institute Freiberg for Resource Technology
Adapting semi-dry graphite anode processing for LiFePO₄ cathodes: Insights into pore structure and particle size control, Niclas Hornischer, TU Braunschweig
Effect of advanced infrared drying on the particulate structure of battery cathodes, Max von Horstig, Technische Universität Braunschweig
PREDICTION OF PRIMARY PARTICLE NUMBERS IN AGGREGATE FROM 2D DATA BASED ON MACHINE LEARNING METHOD, Rui Wang, Otto-von-Guericke-Universität Magdeburg
Development of a PET-like system for particle tracking, Yannick Hartych, Ruhr University Bochum
Laser Diffraction for Particle Size Analysis in Inhaler Applications, Thomas Stübinger, Sympatec GmbH
Effective density of shear sensitive aerosol particles in the con-text of dustiness measurement, Franz Lohse, Technische Universität Dresden
Evaluating the effect of temperature on powder flowability, Salvatore Pillitteri, Granutools
Small-Angle X-ray Scattering: A Powerful Tool for structural characterization of particulate and porous material systems, Frank Lotter, Center for Applied Energy Research e.V.
Investigation Into Effect of Surface Texture on Flowability Of Battery Materials, Vivek Garg, The Wolfson Centre for Bulk Solids Handling Technology
Jet assisted fluidized bed production of battery hetero aggregates with structural analysis, Zhi Cheng Hua, Hamburg University of Technology
Microwave Plasma-Synthesized Graphene-Based Platinum Single Atom Catalyst for Electrochemical Application, Aydan Akyildiz-Mert, Universität Duisburg-Essen Institut für
Modeling and Optimization of Heterojunction Contributions in Metal Oxide Gas Sensors, Luca Völkl, University of Tübingen
Highly integrated light-excited gas sensors on LED microchips using flame spray pyrolysis, Xiao-Xue Wang, University of Bremen
Synthesis of Si-Nanoparticles in a Radio Frequency Plasma Reactor (RF-Plasma), Alexander Eitner, University of Duisburg-Essen
Thermal Conductivity of nanoparticle mixtures produces in spouted bed, Subash Reddy Kolan, Otto von Guericke University
Reorganization behaviour of nanoparticle agglomerates under stress and strain: using machine lerning to gain insights from force spectroscopy data, Linus Hartz, FH Münster
Lagrangian simulation of hetero-agglomeration in turbulent pipe flows for the formation of solid-state battery cathode materials, Victor Kolck, Technische Universität Berlin
Metal release and Nanoparticle formation in single droplet combustion, Jan Derk Groeneveld, University of Bremen
Particle synthesis in confined microreactors, Arne Witte, University of Bremen / Leibniz-Institute for Materials Engineering - IWT
Controlled Synthesis of Copper Sulfide Nanoparticles in Oxygen-deficient Conditions using Flame Spray Pyrolysis (FSP) and its Potential Application, Muhammad Ali Martuza, University of Bremen / Leibniz-Institute for Materials Engineering - IWT
Formulation and development of graded stationary phase materials by Spray Printing, David Herbert Panduro Vela, Friedrich-Alexander-University Erlangen-Nürnberg (FAU)
Comprehensive investigation of the SpraySyn 2.0 burner: characterization of particles, droplets and flame fluctuations using optical in situ diagnostics, Stefan Will, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Synthesis and Reactive Laser Sintering of Copper Oxide and Alumina Nanoparticles for Production of Copper-aluminum Delafossite, Jeldrik Schulte, University of Duisburg-Essen
Photo-polymerization using flame-made quantum dots for stable epoxy coatings, Keroles Riad, Carleton University
Charge transfer in particle-wall collisions, Alfred Weber, TU Clausthal
In situ X-ray scattering of nanoparticle formation in Chemical Vapor Synthesis, Shradha Joshi, Universität Duisburg-Essen
Prediction of flow regimes for flexible stalky particles in four-way coupled CFD-DEM simulations, Eric Drescher, Technische Universität Berlin
Evaluating the fibrillation level of a powder blend for fibrillation process improvement, Salvatore Pillitteri, Granutools
Development of semiochemical-loaded microparticles by spray congealing for sustainable plant protection, Nora Hirschmann, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Formation of a stable SEI in Lithium-Ion-Batteries (LIB) via adding vinylene carbonate (VC) in anode suspensions, Nina Philipp, Technische Universität Braunschweig Institut für Partikeltechnik
Leveraging Powder Characterisation to Predict Dissolution and Dispersion in Pharmaceutical Formulations, Khizra Abdul Wadood, University of Birmingham
Detection and Machine Learning Modeling of Spray Nozzle Blockage as a Process Anomaly in Fluidized Bed Spray Granulation Processes for Quality Assurance, Katharina Mohrdieck, Technische Universität Hamburg (TUHH)
Inverse identification of the mechanical parameters and coupling with improved internal structural analysis of frozen particle fluid systems, Amirali Khosrozadeh, Hamburg University of Technology
CFD-DEM simulation of structure formation during the drying of fuel cell electrodes, Manuel Heck, TU Braunschweig
Investigating the Effect of Mechanical Property and Realistic Shape of mRNA-LNP during Spray Drying via CFD-DEM Coupling, Jiqian Guo, Technical University of Braunschweig
Elucidating cluster and orientation tendencies of nanocellulose particles in slot die coating using CFD-DEM simulations, Lukas Maier, Technical University of Munich
DEM Simulation of Charge Behavior of Particles at Different Feeding Mass Flow Rates, Mehran Javadi, Clausthal University of Technology
Modeling Swelling Behavior in Nano-Silicon Coated Graphite Anodes Using Discrete Element Method: Insights into Particle-Level Interactions and Irreversible Volume Changes, Kashfia Mahin, Technische Universität Braunschweig
Modelling of Drying and Solid Formation of a Levitating Saline Droplet, Benjamin Mignot, University of Leeds
A DEM-Based Ultrasonic Field Method for Particle Levitation, Dimitri Ivanov, TU Braunschweig, Institut für Partikeltechnik
New Opportunities for the Dynamic Simulation of Solids, Christian Eichler, DyssolTEC GmbH
Methodological Approach for Understanding Particle Transport. Case Study: Analyzing Influential Factors and Comparing Simula-tion Software, Cornelia Müssig, Technische Universität Berlin
CFD-based investigation of agglomeration in spray drying with fines return, Enqi Liu, Otto von Guericke University Magdeburg
Correlation of 2D and 3D Particle Characteristics from Simulated Imaging Data, Ralf Ditscherlein, TU Bergakademie Freiberg
GP-based Modeling for PSD Control of Emulsification Processes, Thorben Südhoff, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Dynamic Calibration of DEM-Simulations Using Rotating Drum Experiments, Marius Hoffmann, Trier University of Applied Sciences
Numerical Investigation of Inclined Plane Flow of Highly Deformable Particles Using a Calibration-less Bonded-Sphere Model, Runhui Zhang, ETH Zürich
Discrete modeling of limestone particle calcination and carbonation under isothermal conditions, Enqi Liu, Otto von Guericke University Magdeburg
Prediction of Moisture Uptake in Blister-Packed Solid Pharmaceutical Dosage Forms: Insights from a Case Study, Jan Pech, Invite GmbH
DEM-aided risk reduction in a pharmaceutical powder bin blending process, Benedict Benque, Research Center Pharmaceutical Engineering GmbH
Modeling the entire filtration process from depth filtration to surface filtration with a multi-layer construction and an offset for dust cake growth, Qian Zhang, University of Wuppertal
Comparing and contrasting calibration methods for granular materials, Thomas Weinhart, University of Twente
Modeling the Mechanical Response of Halide Solid Electrolytes and Performance in All-Solid-State Batteries Using Discrete Element Method, Cerun Alex Varkey, Fraunhofer IST
Entropy-based Powder Microstructure Analysis using Micro-X-ray Tomography, Frederik Dörr, AstraZeneca
In silico design space investigation of a novel tablet coating process using advanced coupled simulations, Peter Böhling, RCPE
Data is all you need? An experience report about the challenges of data preparation for machine learning-based analysis of food spray drying processes, Florian Kaltenecker, University of Hohenheim
Multi-Scale Modeling Approach for Solids Flowsheet Simulations: Rotary Kiln for Calcination Process of Zeolite Materials, Moritz Buchholz, BASF SE
Robust and efficient parameter calibration for DEM simulations of shear tests based on Bayesian inference, Giovanni Iozzi, University of Calabria (UNICAL)
Exploring the Effects of Interparticle Forces on the Rheological Properties of Micro Particle Suspensions Using Unresolved Coupled CFD-DEM Simulations, Dimitri Ivanov, TU Braunschweig, Institut für Partikeltechnik
Model development for Characterization of AM Powders based on Real Particle Size DEM Simulation, Negar Sani, Fraunhofer-Chalmers Centre
A Multi-Sensor and Co-Kriging: Toward Innovative Meta-Modeling of Ceramic Powder Milling, Hugo Durand, Cadarache
Short fibre reinforcement in Selective Cement Activation: Challenges of powder handling in the printing process, Niklas Meier, TU Braunschweig, Institut für Partikeltechnik
Under(-)pressure - Analyzing the driving forces behind the die filling under suction on rotary tablet presses, Lars Wagner, Technische Universität Braunschweig
CFD-Simulation of CO2 adsorption for carbon capture in a packed bed based on geometry creation by the Discrete Element Method, Tzu-Yang Huang, Technische Hochschule Rosenheim
Spreadability vs. Flowability: Measurements of metal powders for additive manufacturing, Arne Lüddecke, Technical University of Braunschweig/ Institute for Particle Technology
Leveraging Powder Characterisation to Predict Dissolution and Dispersion in Pharmaceutical Formulations, Khizra Abdul Wadood, University of Birmingham
Insights into pneumatic conveying of a granular phase, Guillaume Dumazer, Mines Saint-Etienne
Automated Process Optimization in Mixing with Adaptive and Dynamic Mixing Modes, Benedikt Schwarz, TH Rosenheim - Campus Burghausen
Coupling of experiments and DEM simulation for powder flow understanding and prediction, Anne-Charlotte Robisson, CEA
Control of Buckling of Colloidal Supraparticles, Lukas Römling, Friedrich-Alexander-Universität Erlangen-Nürnberg
The effect of seed variation on the as-synthesized and aged morphology and optical properties of silver patchy particles, Monika Stadelmaier, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Silica Particles with hierarchical porosity, Nicolás Salcedo Gálvez, Institute of Particle Technology, Friedrich-Alexander-Universität Erlangen-Nürnberg
Size and composition controlled synthesis of bimetallic silver-gold alloy nanoparticles, Nabi E. Traoré, Friedrich-Alexander-Universität Erlangen-Nürnberg
Global analysis of multiwavelength analytical ultracentrifugation data sets from sedimentation velocity experiments, Christina Spruck, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
EIT Based Visualization of Gas-Liquid Flow Patterns in a Horizontal Pipe, Giulio Tribbiani, University of Padova
Particle sizing of polydisperse nano-suspensions using a broadband elastic light scattering (BELS) setup, Stefan Buchstaller, Friedrich-Alexander-Universität Erlangen-Nürnberg
High-Resolution Cameras and Enhanced Data Transfer and Processing Techniques in Dynamic Image Analysis, Ulrich Köhler, Sympatec GmbH
A novel 4-in-1 airflow cytometer for real-time analysis of particles, Erny Niederberger, Swisens AG
An AFM-based approach for quantification of guest particle deformation during mechano-fusion, Phillip Gräfensteiner, Ulm University
On the importance of mixer stressing conditions during the production of solid-state battery cathodes, Finn Frankenberg, Technische Universität Braunschweig
Experimental investigations into a jet-based direct mixing process for solid state battery cathode production in a turbulent pipe flow, Joscha Witte, University of Wuppertal
Formation and characterization of nanostructured TiO2-ZrO2 hetero-aggregates in opposed jet fluidized bed, Raul Favaro Nascimento, Institute of Particle Technology
Assessment of the mixing quality of carbon black – silica hetero-aggregates, Simon Buchheiser, Karlsruhe Institute of Technology (KIT)
Experimental and simulative studies on the structure formation of SiO2-PS heteroagglomerates, Nane Kühn, TU Braunschweig
CFD Investigations of Multiphase Mixing of Heterogeneous Nanoparticles in an Opposed Jet Fluidized Bed, Muhammad Usman Farid, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Mixing Mechanisms in Intersecting Spray Flames for Hetero-Aggregate Particle Production, Tobias Tabeling, University of Bremen
Prediction of the number of heterocontacts in two-component systems, Anjul Pandey, University of Stuttgart
A novel approach to model the particle dynamics for the synthesis process of hetero-aggregates, Amir Karimi Noughabi, University of Duisburg-Essen
Characterization of mixing and structure in nanoparticle hetero-aggregates using convolutional neural networks: 2D-projection versus 3D-reconstruction, Florian Krause, Universität Bremen
Investigation of the nano particle formation mechanics in a hetero-aggregation process by desublimation and supersonic flow, Malte Nestriepke, RPTU Kaiserslautern - Landau
Numerical Simulation and Validation of Electrospray Deposition Patterns, Georgios Koukougkelis, Otto von Guericke University Magdeburg
Determination of droplet size from wide-angle light scattering image data using convolutional neural networks and synthetic training data, Tom Kirstein, Ulm University
Tracking hetero-aggregate formation in jet-based tube mixing via optical in situ detection, Felix Luc Ebertz, University Duisburg-Essen
Tailored hetero-aggregates from gas phase synthesis for heterogeneously catalyzed transient reactions, Xiao-Xue Wang, University of Bremen
Characterization and structure reconstruction of aggregates from two-dimensional scale, Hantao Yu, Otto-von-Guericke Universität Magdeburg
Effects of extrusion mixing on powder properties and processability of LFP mixtures, Milena Lux, Fraunhofer IWS
From Pores to Performance: Multi-Scale Analysis of Catalyst Layers for PEM Fuel Cells, Fatih Özcan, University of Duisburg-Essen
Proof of physical work for a more sustainable decentralized consensus in blockchain technology, Frank Rhein, Karlsruhe Institute of Technology (KIT)
Microplastic pollution in aquatic environments: A meta-analysis of influencing factors and methodological recommendations, Linus Hartz, FH Münster
Synthesis of Iron-Oxide Supraparticles for Enhanced Antibacterial and Photothermal Therapy, Mohaned Hammad, University of Duisburg-Essen
Numerical modelling and real-time magnetic resonance imaging of hydrodynamics in vibrated bubbling fluidized beds, Nick Hildebrandt, Hamburg University of Technology
Discrete differential geometric methods for machine precision simulation and parameterisation of particle-particle liquid bridges, Stefan Endres, Leibniz Institute for Materials Engineering - IWT
Linking Powder Flowability Measurements to Spread Layer Quality Metrics in Additive Manufacturing via DEM, Ben Jenkins, Granutools/University of Birmingham
A Probability-Based Model for Particle Resuspension: Highlighting the Effect of Turbulence-induced Resonance, Yiyang Zhang, Tsinghua University
Online velocity estimation in cold gas spraying using acoustic measurements, Yannik Sinnwell, Anton Maksakov, University of Kaiserslautern-Landau (RPTU)
Data-driven Soft-Sensor for Real-Time Process Control in Stirred Media Mills, Christoph Thon, Technische Universität Braunschweig, Institute for Particle Technology
Influence of filter cleaning frequency on the particle size distribution of granules in continuous wet granulation, Alana Delvos, Heinrich Heine Universität Düsseldorf
Stochastic modeling of particle structures in spray fluidized bed agglomeration using methods from machine learning, Sabrina Weber, Ulm University
Continuous Aqueous Two-Phase Flotation (ATPF): Adaptive Optimal Control for Autonomous Enzyme Separation, Kim Carina Lohfink, Karlsruhe Institute of Technology (KIT)
Towards Autonomous Control of Slug Flow Crystallization, Maximilian Rainer Kattner, TU Dortmund University
Towards an autonomous powder compaction process, Jens Bartsch, TU Dortmund University
Real-time prediction of aggregate structure based on bivariate aerosol dynamics, Lukas Fuchs, Universität Duisburg-Essen
Autonomous structure formation in fluidized bed spray agglomeration, Andreas Bück, Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)
Towards Autonomous Nanoparticle Synthesis: Model-based Control and Al-Doped ZnO Crystallization, Marcel Kévin Jiokeng Dongmo, Karlsruhe Institute of Technology / Institute of mechanical process engineering and mechanics
Control and Optimization of Spray-Drying Parameters for Alumina: Influence of Spray Rate on Particle Descriptors, Rahul Mitra, Ulm University
Real-time control of nanoparticle synthesis by spark ablation, Jonah V. Weidemann, Danijel Čuturić, Universität Duisburg-Essen
Introducing a Novel Autonomous Process Chain for Selective Precipitation of CaCO3 and MgCO3 using Extracted Mine Tailings, Chinmay Hegde, Otto von Guericke University Magdeburg
Model-based optimization of process parameters in high energy impact additive manufacturing processes, Thomas Wilhelm, Yannik Sinnwell, University Ulm
