Set print view

Which events should be shown in the print view?

Particle Interactions and Interfaces

Chemical and size-specific separation of fine particles at liquidliquid interfaces: Challenges and system design

Stability and granulometric state of Pickering emulsions

Coating and Drying of Slot Die Coated OLED-Multilayers

tba. on site

Charge transfer between single highly resistive particles: Experiments and Numerical Simulation

Additive Manufacturing with ceramics: Simulation of the printing process using meshfree simulation methods

Formation and Synthesis of Particles

Aerosol formation in the course of VOC-Degradation by means of Non-Thermal Pulsed Plasma

Optical investigation of particle characteristics produced by Spray Flame Synthesis using Wide-Angle Light-Scattering

Impact of atomization on particle formation in spray flames

Synthesis of nanoparticles out of silicon and germanium in a controlled nucleation aerosol reactor

Automated High-throughput synthesis of colloidal semiconductor nanoparticles: study on the influence of mixing

Continuous flow metal patch coating of flake-like particles

In Situ monitoring of particle formation with spectroscopic and analytical techniques under solvothermal conditions

Investigation of size distributions in highly concentrated particle suspensions – influence of production method

Synthesis and processing of tailored AZO nanocrystals

Correlation between pore size distribution and thermal conductivity of VIPs based on precipitated silica

Application of Particle Technology

Sintering free conductive hybrid ink for inkjet printed electronics

Developments in catalytic stripper technology for powder measurement

Sustainable turbidity controls mimicking oil-in-water emulsions by the use of polymer particles

Evaluation of the mixing mechanisms during Twin-Screw-Extrusion by Residence Time Distribution

Modelling and Simulation

Numerical study of grain shape effect on surface erosion using smoothed particle hydrodynamics

The Influence of Shape on the Settling of Particles Simulated with a Homogenised Lattice Boltzmann Approach

Optimization of Pore Scale Conjugate Heat Transfer using LBM Simulations towards Lower Cost Vacuum Insulation Panels

Fast, flexible particle simulations: An introduction to MercuryDPM

A thorough analysis of temporal plate erosion by particle impacts and validation of Lagrangianm models

Mechanical behavior of particle aggregates during drying

Heat transfer coefficients in flighted rotary kilns: Comparison of experiments with DEM simulations

A dimensionless number for scaling particle size and stiffness in DEM analyses of cohesive powders

Modelling of sintering in macro porous structures with discrete element method (DEM)

Predicting flowability of cohesive bulk solids via DEM

Particle Technology for Pharmaceuticals

Surface Modification of Pharmaceutical Particles via Scalable Atomic Layer Deposition in Fluidized Bed Reactors

Atomic Scale Surface Engineering of Micro- to Nano-Sized Pharmaceutical Particles

Development of encapsulated air microparticles: Morphology of particles obtained by spray drying & single droplet drying

Comparison of Scale Concepts for Pharmaceutical Hot-Melt-Extrusion

Nano Hybrids

Cellulose aerogel particles via emulsion technique

Multiscale modeling of particles supercritical drying process

Drying of aerogel particles and beads in lab and pilot scale

Kinetics of Supercritical Drying for Production of Aerogel Particles: Effects of Process Parameters and Gel Properties

Aerogel particles: state of the art and recent advances

Carbon-based aerogels for adsorption of toxic gases and air decontamination

Cellulose-hybrid aero/xerogels for sorption of gas, moisture and cationic compounds

Chitosan-based aerogels with exceptional properties for environmental control system

Characterization of Particles

Nanofocused X-ray tomography & Image Processing for Quantitative Analysis of Pharmaceutical Particulate Solid Products

Chemical and mechanical stability of casein microparticles

The role of glidants in interparticle friction

Optical single particle detection with wide dynamic range for nano- and microparticle counting and sizing

Comminution

Fine grinding of inorganic material mixtures in stirred media mills

Attrition methods and how to select a jet velocity in attrition test

Comminution of wood – process parameters

Dispersion and Rheology of multiwall Carbon Nanotubes

Breakage of Carbamazepine Dihydrate Crystals under Impact

Time-resolved characterization of customized aluminium-doped zinc oxide nanocrystals by Small-Angle X-ray Scattering

Handling and Flow of Particulate Systems

Mechanistic modelling of powder flow into a confined space

Towards modelling gas-solid flows of cohesive particles

Dynamic behavior of particle curtains in a flighted rotating drum investigated by PTV experiments and a DEM model

Real-time in-situ Rheological Assessment of Sticky Point Temperature and Humidity of Powdered Products

Seperation

Multidimensional fractionation of solid microparticles from aqueous suspensions by crossflow filtration

Numerical & Experimental Investigations on the Influence of Electrical Charge of Electret Filters on Particle Deposition

Prediction of Filtration Efficiency and Local Deposition inside Fibrous Filters

CFD simulations of cyclones with and without an eccentrically positioned vortex finder

Quantitative evaluation of nanoparticle separation using sizeexclusion chromatography

Fractionation of Nanoparticles by Preparative Gel Electrophoresis

Zonal Rotor Ultracentrifugation: New Avenues in Sorting Nanoparticles

Investigation of Coefficients of Restitution for a Deflector Wheel Classifier

Determination of non-ideality parameters from theoretical & experimental sedimentation- velocity & equilibrium studies

Investigation of continuum mechanics models of granular flow by MRI

Agglomeration and Granulation

Scale-up of tableting processes in different fields of application

Roller compaction: Online monitoring of powder feeding

High-Shear Granulation Process of Soft Porous Particles

Roller compactor: tracking the change in plastic deformation of the particle during roller compaction process

Liquid bridge interaction in funicular regime: toward detailed simulation of wet particle agglomerates

An investigation on the evolution of granule formation by in-process sampling of a high shear granulator

Keynote

Engineering of particles by spray drying and spray fluidized bed processes

Contribution of Particle Technology Research on CO2 capture and reduction

Create print view