You are here: Home | Highlights | Wed, 10.04.2019

Programme

Highlights
Overview
Speakers
Tuesday 09 April Tue. 09.04.
Wednesday 10 April Wed. 10.04.
Thursday 11 April Thu. 11.04.

Highlights
Overview
Speakers
Tuesday 09. April
Wednesday 10. April
Thursday 11. April

Filter daily programme by categories

Show all

Filter lectures & events

Set print view

Which events should be shown in the print view?

Particle Technology for Pharmaceuticals: Application of Physicochemical Characterization Techniques for Complex Generic Product In Vitro bioequivalence studies; Determination of the solid(true) density of pharmaceutical powders and the impact on tablet compression characterization; Energy State Quantification of Amorphous Systems using Differential Scanning Calorimetry; Particle Size Analysis for Medical Sprays and Inhalation Products; Intermittency between avalanche regimes on grain piles; Calibration strategy for material parameters in DEM modelling of compaction; Development of a novel drying technology for drying of wet powders and pastes without change of initial particle size; In situ investigation of the protein particle formation process during drying in an acoustic levitator; Online Monitoring of the Drying Process of Pharmaceutical Granules using a Novel Miniaturised NIR Spectrometer; Comparing superquadric and multisphere particles for simulating pharmaceutical tablets; An attempt to mechanistically explain derived compression parameters of powders by acting micro-processes; Development of a novel continuous production system of pharmaceuticals; Pharmaceutical powder flow during die filling

Comminution: tba. on site; Characterization of stressing conditions in jet mills by particle probes; Understanding the Fine Grinding of Calcium Carbonate in Stirred Media Mills

Life and Food Science: Improving the rehydration of granulated food powders; Capillary penetration into heterogeneous food powders; Adsorption and desorption behavior of protein particles at liquid-liquid interfaces under flow induced stresses

Modelling and Simulation: Simulation of soot and ash dynamics in diesel particulate filters employing a hybrid subgrid with LBM; Particle systems on the molecularscale: Multiscale modeling of bio-agglomerates; Potentials and Constraints for the application of CFD to dry powderinhalers: A Review; Residence Time Distribution Prediction in Large-Scale Continuous Apparatuses using Recurrence CFD; Simulation of a Fluidized Hot-Melt Coating Process Using CFD - DEM; Microscale CFD-DEM Simulation of the Carbon Black Aggregates Behavior in a Shear Flow; Validation of a CFD – DEM Simulation Coupling Method of a Tablet Coating Process; An Efficient CFD-DEM Coupling Using Network Communication; Coupled CFD-DEM simulations to model the viscosity of nanoparticulate suspensions; Coupled DEM/LBM Simulation of DLD Fractionation; Optimal Control and Optimization of Fluid Flows in Process Engineering; A Surrogate Based Modelling and Optimization Methodology for Calibration and Engineering Design using DEM; Uncertainty propagation for population balance model of a conical screen mill

Particle and Bulk Powder Characterization: Single particle properties of elongated particles and their impact on bulk solid properties; Understanding the nature of Active Pharmaceutical Ingredients during dry granulation; Magnetically assisted impaction coating (MAIC) for blending optimising; Measuring powder flowability at low stresses: comparison of techniques; Bag filling characteristics of starch related to the flow properties of different starches; Die filling behavior of spray dried ceramic granules; Ultrasonic In-Die Measurement of Deformation Properties; The shear response of particles in the FT4 powder rheometer: a numerical and experimental investigation; Characterising Powder Flowability in the Intermediate Flow Regime; Decreasing capillary and electrostatic forces with the addition of mesoporous silica grains

Fluidization and Multiphase Flow: Fluidized bed rheology: Direct measurements of apparent viscosity through stokesian and bingham approaches; Influence of Temperature on the Transition from Bubbling to Turbulent Fluidization for Geldart's Group B Particles; Understanding calcium looping activity of limestone for thermochemical energy storage of concentrated solar power; High pressure fluidized-bed reactors for chemical looping CO2 capture processes using two novel concepts; Coupled VOF/CFD-DEM method for simulation of heat transfer in dense particle-laden free surface flow; Drying of cohesive particles in vibrated fluidized beds

Particles for Additive Manufacturing: Production of complex polymer particles for additive manufacturing by spray drying; Effect of flowability on powder spreading process in Additive Manufacturing; The effect of temperature on the flow properties of polymeric powders for selective laser sintering; Polymer and metallic powders flowability & electrical charges characterization for additive manufacturing; Comparison of different flow assessments for Selective Laser Sintering powders; Advanced analytical insight for optimising metal powders for additive manufacture; Manufacturing and application of novel polymer particles for selective laser sintering; Discrete Particle Model of Sintering; Characterization of powders for additive manufacturing

Characterization of Particles: Performance test of a novel multi-parameter optical particle counter for colloidal particles; Crunch it if you can – or why particle sizing can free up more than 50 % of energy use in the chocolate industry; Enhanced spectral and size analysis of nanoparticles using analytical ultracentrifugation; The Radial Centrifugal DMA – A Novel Method for Multidimensional Aerosol Characterization

Particle Design and Functionalization: Design of skeletal silica nanoparticles to improve optical property; Synthesis and Application of a Magnetised Ternary Core-Shell Catalyst for Biodiesel Production; Continuous manufacturing of coated powders by gas-phase deposition in a Pneumatic Transport Reactor; Morphology control in the aerosol synthesis of titania by vaporliquid-solid reaction and heterogeneous nucleation; Enhancing the Performance of Catalytic Oxidation of n-Butane in a Microwave-Heated Gas-Solid Fluidized Bed Reactor; Strategy for coating of aerogels using spouted bed technology; Numerical investigation: gas dynamics in a bubbling gas-solid fluidized bed in presence of cohesive interparticle forces

Particle Technology for Energy Systems: Particle technology based design of lithium-ion battery electrodes; Dry coating of active material with solid electrolyte for all-solid-state secondary battery; tba. on site

Particle Interactions and Interfaces: Flocculation performance of designed polyelectrolytes in industrial effluent using Laser Diffraction Spectroscopy; Normal elastic impact of wet particles: a DEM study; Influence of the surface structure on the fluid displacement during fine particle collision; Demonstrating Surface Structural Differences of Dry Powders: Processing and Powder Flow; From elasticity to capillarity in soft contacts; Exploring the Requirements of Pharmaceutical Powders for use in 3D Binder Jetting Printing

Agglomeration and Granulation: Development of Dry Granulates: Comparability of Granulates Obtained by Tableting and Roller Compaction; Experimental parameter study on Mn oxides agglomeration’s key factors; Auto-Agglomeration of Cohesive Powders Due to Mechanical Vibration; Mechanistic modeling of spherical agglomeration process for pharmaceutical manufacturing; Characterization of agglomerating wet fluidized particulate; Experimental investigation of dynnamic process stability of continuous fluidized bed spray agglomeration…; tba. on site; Electrostatic Spray Drying – Innovation in Spray Dry Technology; In-Line Measurement System for Ribbon Strength at a GERTEIS PACTOR; Liquid contact spreading in tumbling drums: Effect of material properties and process parameters

Application of Particle Technology: An advanced numerical approach to predict wall erosion due to particle impact; Photocatalytic performance of TiO2 nanoparticles decorated with gold nano-nuggets in a scalable flow reactor; Silver nanoparticles – production, application and regulatory background; The new test dust: DMT A2 fine quartz-free

Keynote: Particle Technology in Additive Manufacturing; Model Driven Design of Particulate Processes and Products - Applications in Pharmaceutical Manufacture and Beyond

Create print view

Daily overview Wednesday 10 April 2019

Print daily overview

Refine search

Filter by themes

Congress

⁄ ⁄ more

PARTEC 2019 - “Particles for a better life”

Congress delegates can look forward to speakers from the USA, UK, Australia and Germany among others.

Particle Technology for Pharmaceuticals (13)

10:20 -