You are here: Home | Highlights | Tue, 09.04.2019

Programme

Highlights
Overview
Speakers
Tuesday 09 April Tue. 09.04.
Wednesday 10 April Wed. 10.04.
Thursday 11 April Thu. 11.04.

Highlights
Overview
Speakers
Tuesday 09. April
Wednesday 10. April
Thursday 11. April

Filter daily programme by categories

Show all

Filter lectures & events

Set print view

Which events should be shown in the print view?

Mixing: Validation of DEM simulations of a high intensity mixer and coater; Experimental study on shear induced percolation; Shaping Segregation: Multiscale modelling of industrial mixers

Interface Properties: Formulating with particles using Hansen Solubility/Similarity Parameters; Formulating with particles using Hansen Solubility/Similarity Parameters; On the characterization of the wettability of microparticles using Finite Dilution Inverse Gas Chromatography; Atomic Force Microscopy:– A Powerful Tool for the Quantitative Determination of Adhesive Interactions; The Effect of the Surface Functionalization of in Polymers Embedded Nanoparticles; Liquid – solid interaction during wet extrusion/spheronization: Impact of different solvents on pellet characteristics; Selective Agglomeration of Graphite in a Heterogeneous Suspension – Effect of Contact Angle

Handling and Flow of Particulate Systems: Characterisation of flow behaviour of metal powders for 3D printing application; Revealing Rheology of Dense Non-cohesive Granular Materials by DEM Simulation; Influence of Fluid Pressure Gradient and Fluid Drag on Hopper Outflow Characteristics for Cohesive Powders; A New Method for Particle Dispersion by Induction Charging; Experimental study on size fractionation of micro particles in serpentine micro channels; Online monitoring of particle distribution in pneumatic conveying systems via electrical capacitance tomography; Investigation of energy loss in horizontal bends in dilute phase pneumatic conveying; Dependence of flowability of dusts from dry off-gas dedusting & other fine granular powders on the consolidation stress; Cohesive Powder Flow of Faceted Particles in Screw Feeders

Particle and Bulk Powder Characterization: Significant advances in bulk solids handling and ultrafine grinding through the life’s work of Prof. Jörg Schwedes; Flow of formulated powders; TiO2 Pigment Sizing: Constituents, Aggregates and Primary Particles; Study on the influence of solids volume fraction on filter cake structures using micro tomography; Characterization of precipitated Silica in terms of use in vacuum insulation panels (VIPs); In situ determination of the polymorphism gas-borne nanoparticles by Raman spectroscopy; Unifying size-topology relationship in random packings of polydisperse adhesive spheres

Fluidization and Multiphase Flow: Spatially-averaged models for fluidized gas-particle suspensions; DEM-CFD simulation of the dispersion of particle agglomerates by cyclonic flows; A Simple Model to Account Particle Attrition in Pneumatic Conveying; A comprehensive review of current drag models and the physical limitations of their validation; Stability Analysis of Uniform Fluidization; Fluidization characteristics and agglomerate formation during drying of nanosuspensions in a vacuum fluidized bed; Measurement of residence time distributions in a continuous spouted bed; Bubble Hydrodynamic Comparison for Geldart Group a and B Materials at Different Fluidization Regimes; Drying of cohesive powders in vibrated fluidized beds; Particle Attrition in cyclone; Simple Approach for Quantifying the Magnitude of Interparticle Forces in a High Temperature Gas-Solid Fluidized Bed; tba. on site

DynSim SPP 1679: Model-based optimization of ripening processes with feedback; Dynamics and control of continuous fluidized bed layering granulation; Dynamic Flowsheet Simulation of a Crystallization Reactor with Material Recovery via a Hydrocyclone; Dynamic flowsheet simulation of the mechanical fluid separation in solid bowl centrifuges; Interconnected multivariate population balances based on the Monte Carlo method; Simulation of Technical Precipitation Processes DYNSIM; A software framework for dynamic flowsheet simulation with advanced treatment of multidimensional distributed parameters; Simulation of dynamic behaviour of fine grinding in stirred media mills

Characterization of Particles: On-line Particle Size Analysis byLaser Diffraction and Scattering for nanoscale Suspensions and Emulsions; Online Structure Determination of Aerosol Particles Using Sequential Classification by Mobility/Vacuum Aerodynamic Ø; Sintering of Fe-Nanoparticles in a Well-defined Model Flow Reactor; Porosity determination techniques for spray dried particulate systems; Segmentation-Optimized Preparation Method for Particulate Samples in Micro-CT Analysis; Formation and characterisation of inorganic particle residues from lube oil droplets; Imaging of Particles for Size and Shape Analysis in Laboratory and Process Environments; Characterization of Particles needs International Standardization; Characterization of Nano-Aerosols by Wide-Angle Light Scattering (WALS) and Laser-Induced Incandescence (LII)

Modelling and Simulation: Experimentally validated DEM characterization for a hydrodynamic granular model with application to hopper flow; Predictive modelling and experimental evaluation of structured food power dissolution; Numerical simulations of dry granular avalanches flowing down a vibrated inclined plane; Particle simulations: a story of scales and how to bridge them; Discrete Element Method simulation of wet granulation; Numerical Investigation of Particle Transport in Human Respiratory System; An interface resolved immersed boundary method in XDEM for particulate flow simulations; Development of dust release functions validation methods for simulations; Modelling deformable particles in complex fluid flow: A reduced-order modelling approach; Modelling breakup of a suspension droplet containing nanoparticles during pulse combustion drying; Modelling the calendaring process of lithium-ion electrodes via DEM simulations; Coarse-grained DEM for granular shear flow and application to powder mixing process; DEM study of cohesive solid flow in screw feeder with asymmetrical screw designs; Modelling of particle formation in spray-drying of multi-component mixtures; Numerical simulations of melt pool dynamics in powder-bed additive manufacturing processes; Modelling and Characterization of Aggregated Nanoparticle Films; Numerical Simulaiton of the Frictional Behaviour of the Tire-Pavement System in Presence of Ice-Snow Interface

Particle Technology for Pharmaceuticals: Characterization of Liposomal Particles for Pharmaceutical Applications; Process chain design as a tool to tailor the release kinetics of poorly soluble APIs; Characterization of primary lyophilization using a coulometrically based humidity sensor; Characterization of primary lyophilization op frozen bulky solids

Mechanics of Particulate Solids: Contact behavior of wet cylindrical particles during compression and impact; The Influence of Protein Crystal Shape and Breakage on the Filtration Behaviour Using a Downscaled Filtration Cell; A numerical adhesive contact law for deformable particles; Stability analysis of stick-slip phenomena; Understanding the mechanics of particulate solids: From particles to continuum-theory and applications

Application of Particle Technology: What Particle Measurement Software should provide to prepare the Way to Industry 4.0; Real time measurement of flocs produced during the water treatment process; Adaptive feedback control of continuously operated convective dryers for particulate materials

Keynote: Particle Functionalization by ALD: Fundamentals, Applications, and Path Forward; Dynamics of Cohesive Powder Flow

Create print view

Daily overview Tuesday 09 April 2019

Print daily overview

Refine search

Filter by themes

Congress

⁄ ⁄ more

PARTEC 2019 - “Particles for a better life”

Congress delegates can look forward to speakers from the USA, UK, Australia and Germany among others.

Mixing (3)

14:40 -